Hantek HSA2030 User Manual page 38

The output file can include the time information when printing or storing interface image according
to your setting.
Set Time
Set the display time of the analyzer. The time format should be hhmmss, for example, 231211
(denotes 23:12:11).
Set Date
Set the display date of the analyzer. The date format should be YYYYMMDD, for example,
20111001 (denotes October 1st, 2011).
8. Diagnostics
Screen Test
Test whether the screen has a dot defect using five colors: White, Red, Green, Blue and Black.
Key Test
Enter the keyboard test interface. Press the function keys at the front panel one by one and
observe whether the corresponding key lights. If not, an error may have occurred in that key. Note
if the key at the front panel is transparent, its backlight will also light when you press it. To exit the
test, press Esc three times.
9. Update
User can update firmware. Plug in the U-stick within latest firmware file, the instrument will detect
it. Click UTILITY
10. System Information
User can get the instrument information clearly. Click UTILITY
includes firmware version, temperature, operation time of this time, power voltage.
YYYY-MM-