Adjustment Procedure - M-system R1M-A1 Instruction Manual

■ INPUT REGISTERS DESCRIPTION
Indicates I/O type for each channel. The data are 16-bit integer values.
MODEL I/O
R1MS-GH3
DC input
R2M-2G3
R1M-GH2 DC input
R1M-GH2 T/C input
R1MS-GH3
R2M-2H3
R1M-J3 RTD input
POT input
R1M-D1 DO
R1M-A1 DI
CHECKING
1) Terminal wiring: Check that all cables are correctly con-
nected according to the connection diagram.
2) Power input: Check supply voltage.

ADJUSTMENT PROCEDURE

This unit is calibrated at the factory to meet the ordered
specifications, therefore you usually do not need any cali-
bration.
I/O TYPE
0x00 -10 to +10 V
0x00 -20 to +20 V
0x01 -5 to +5 V
0x02 -1 to +1 V
0x03 -800 to +800 mV
0x04 -200 to +200 mV
0x05 -50 to +50 mV
0x06 -10 to +10 mV
0x10
0x11 K (CA)
0x12 E (CRC)
0x13 J (IC)
0x14 T (CC)
0x15 B (RH)
0x16 R
0x17 S
0x18 C (WRe 5-26)
0x19 N
0x1A U
0x1B L
0x1C P (Platinel II)
0x30 JPt 100 (JIS '89)
0x31 Pt 100 (JIS '89)
0x32 Pt 100 (JIS '97, IEC)
0x33 Pt 50 Ω (JIS '81)
0x34 Ni 508.4 Ω
0x35 Pt 1000
0x40 0 to 100 ohms
0x41 0 to 500 ohms
0x42 0 to 1 kohms
0x43 0 to 10 kohms
0x60
0x70
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
SELECTION USABLE RANGE
-10 to +10 V
-22.7 to +22.7 V
-5.6 to +5.6 V
-1.4 to +1.4 V
-860 to +860 mV
-215 to +215 mV
-53 to +53 mV
-13.4 to +13.4 mV
(PR) 0 to 1770°C
-270 to +1370°C
-270 to +1000°C
-210 to +1200°C
-270 to +400°C
100 to 1820°C
-50 to +1760°C
-50 to +1760°C
0 to 2320°C
-270 to +1300°C
-200 to +600°C
-200 to +900°C
0 to 1395°C
-200 to +500°C
-200 to +660°C
-200 to +850°C
-200 to +649°C
-50 to +280°C
-200 to +850°C
0 to 100 %
0 to 100 %
0 to 100 %
0 to 100 %
R1M-A1
NOTES
ATT SW ON
ATT SW ON
ATT SW ON
EM-5661 Rev.6 P. 8 / 8