(9) Divide the final horizontal
angle reading by the number
of repetitions to calculate the
average angle value.
Example: If the final reading after 8 repetitions is 360°01'20",
To cancel or return to normal operation following repeat
horizontal angle measurement, depress the [HOLD] key again
until the third beep of the buzzer (approx. 1 sec.).
The maximum summed readout range is less than
±2000°/±2222.2222G.
If exceeded, the "OVER" warning will be displayed and
operation stops.
To reset, rotate the instrument in the reverse direction to display
the most recent repeat horizontal angle reading.
•
Repeat measurement cannot be performed when the MIL unit is selected.
36
the averaged reading will be:
360°01'20"/8 = 45°00'10"
VA:
114°27´40"
HA:
360°01´20"
VA:
114°27´40"
HA: OVER
RUN
RUN