RCA 25424 User Manual page 9

NOTE: To ensure proper battery installation, the connector is keyed and can be inserted only
one way.
4. Insert the battery pack.
5. Close the battery compartment by pushing the door up until it snaps into place.
Connecting the AC (Electrical) Power
Plug the power adaptor cord into the power jack on the back of the base and the other
end into an electrical outlet. The charge/in use indicator turns on to indicate the battery is
charging when the handset is on the cradle.
Allow the phone to charge for 12 hours prior to first use. If you do not properly charge the
phone, battery performance is compromised.
CAUTION: To reduce risk of personal injury, fire, or damage use only the 5-2652 power
adaptor listed in the user's guide. This power adaptor is intended to be correctly orientated in
a vertical or floor mount position.
Connecting the RF Module
Insert the RF module into the back of the base unit until it snaps into place. The display
wi l show when the RF module is connected properly.
Connections and Setup