RCA 25424 User Manual page 20

Caller ID
Depending on (a) how the incoming caller's phone number is formatted when received,
and (b) whether or not you pre-programmed your local area code into memory, you may
need to adjust the format of the caller's phone number before dialing it back.
The Redial/Format
formats include:
Number of digits
Eleven digits
Ten digits
Seven digits
NOTE: If the phone company does not supply all ten digits of an incoming caller's number,
you will not be allowed to adjust the format of that number.
Scroll to the number you want to call back:
3. If the number does not dial as shown, press the
necessary, until the correct number of digits show in the display.
4. Press the Talk button. The number dials automatically.
Deleting the Current Caller ID Record
To delete only the record in the display:
1. Use the CID/4 button and then
record.
2. Press Delete/Mute.
Deleting All Caller ID Records
To delete all the Caller ID records in memory:
1. Use the CID/4 button and then
2. Press and hold Delete/Mute. The display asks DELETE ALL? for several seconds.
3. Press Delete/Mute
to standby mode.
Caller ID Errors
If there is an error in the transmission of information to your Caller ID phone, INCOMPLETE
DATA is displayed.
If you have not subscribed to Caller ID service or it is not working, NO DATA is displayed.
0
button lets you change the format of the displayed number. Available
Explanation
long distance code "1"
+ 3-digit area code
+ 7-digit telephone
number.
3-digit area code +
7-digit telephone number.
7-digit telephone number.
VOL ( + or -)
VOL ( + or -)
again, within five seconds, to erase all records. The display will return
Example
1-317-888-8888
317-888-8888
Redial/Format button. Repeat if
button to display the desired Caller ID
button to display any Caller ID record.
888-8888