RCA 25424 User Manual page 13

Load Default
1. Press Menu button once, then press
displayed.
2. Press Select/Save
3. Scroll the VOL ( + or -) buttons
4. Press Select/Save
Set Time
The time cannot be set manually in the handset, only at the base. Any update to the base
time will be automatically sent to the handset.
Registration (Re-Registration)
Registration links the cordless handset to the base which allows the handset to use the
base's phone connection. A cordless handset will not operate until it is registered to the
base. Your handset comes pre-registered and ready-to-use. If your handset and/or module
becomes damaged or lost, you will need to purchase a new handset/module unit.
If your handset becomes unregistered, it may be necessary for you to re-register to the
base. To do so follow the steps below, keep the handset near the base at all times.
1. Press Menu button once, then press
displayed.
2. Press Select/Save
3. Scroll the VOL ( + or -) buttons
4. Press Select/Save
5. On the base, press and hold the
the display of the handset will show SUCCESSFUL and has a short beep sound.
6. If the registration fails, FAIL! TRY AGAIN will show on the handset display. Please repeat
the above steps.
Basic Operation
Answering a Call
1. Press the Talk or Speaker button on the handset.
USE).
2. When finished, press
cradle to hang up.
button to select.
to select YES.
button to reset to the default settings.
button to select.
until REGISTRATION is displayed.
button to select. The display shows SEARCHING.
Page
the Talk or Speaker button
the VOL ( + or -) buttons
the VOL ( + or -) buttons
button for 10 seconds. If the registration succeeds,
(The base displays CORDLESS H/S IN
or replace the handset in the charge
Basic Operation
until LOAD DEFAULTS is
until PHONE SETTING is
1