H Andset - RCA 25424 User Manual

Storing a Name and Number in Memory
1. Press the Conf/Store
2. Use the keypad to enter the phone number (up to 32 digits).
3. Press the Select/Save
4. Use the touch-tone pad to enter a name (up to 21 characters). More than one letter is
stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice
for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the
letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a
space between the first and last name. Press the 7 key 4 times for the letter S; press the 6
key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the
letter T; press the 4 key twice for the letter H.
5. Press the Conf/Store
Storing a Redial Number
1. Make sure the phone is OFF (not in TALK mode).
2. Press the Redial/Format
3. Press Select/Save
4. Then press Select/Save
5. Use the keypad to enter the names.
6. Press Conf/Store
Inserting a Pause in the Dialing Sequence
Press the #Pause button on the touch-tone pad twice to insert a delay in the dialing
sequence of a stored telephone number when a pause is needed to wait for a dial tone
(for example, after you dial 9 for an outside line, or wait for a computer access tone.) Each
pause counts as 1 digit in the dialing sequence. The letter "P" in the displayed number
indicates a pause.
Reviewing, Changing or Deleting Stored Names/Numbers
To Review: Press DIR/3on the handset, then press the
through the stored
To Change: While viewing the record, press the
Storing a Name and Number in Memory.
To Delete: Press DIR/3on the handset, then press the
desired memory.
1. Press the Delete/Mute
2. Press Delete/Mute
button on the handset, ENTER NUMBER is displayed.
button. The display shows ENTER NAME.
button again to save your
button on the handset to review the redial number.
and ENTER NUMBER is displayed.
again and ENTER NAME is displayed.
button and ENTER LOCATION is displayed.
numbers.
button. DELETE? is displayed.
again to confirm.
selection.
VOL ( + or -)
Select/Save button. Follow the steps under
VOL ( + or -)
Memory
button to scroll
button to scroll to a
1