Functional Description; Installation; Securing The Base; Switch Action - Makita LW1401 Instruction Manual

10.
that might be ignited by sparks. Be sure that
others are not in the path of the sparks. Keep
11. If the wheel stops during the operation, makes
the tool immediately.
12. Always switch off and wait for the wheel to
work position, angle or the wheel itself.
13. Do not touch the workpiece immediately after
operation; it is extremely hot and could burn
your skin.
14. Store wheels in a dry location only.
SAVE THESE INSTRUCTIONS.

INSTALLATION

WARNING:
This tool produces spark when
cutting a workpiece. Do not install this tool in
materials might be ignited by the spark from the
tool. Also make sure that there is no such material
near the tool before starting the operation.

Securing the base

This tool should be bolted with two bolts to a level and
stable surface using the bolt holes provided in the tool's
base. This will help prevent tipping over and possible
1
1. Bolt holes 2. Base
FUNCTIONAL
DESCRIPTION
CAUTION:
checking function on the tool.
Unlocking/locking tool head
The tool head can be locked. Always lock the tool head
when not in use or carrying.
For LW1400
To unlock, depress the tool head slightly and push the
lock pin. To lock, return the lock pin while holding down
the tool head.
1
1. Lock pin
For LW1401
Unhook the lock chain from the hook. Always hook the
lock chain to the hook when not in use.
2
1. Hook 2. Lock chain

Switch action

WARNING:
always check to see that the switch trigger actu-
ates properly and returns to the "OFF" position
when released.
5 ENGLISH
Always be sure that the tool is
Before plugging in the tool,
1
2