Lenze 8200 vector series Manual page 2

Show/Hide Bookmarks
This documentation is only valid for 8200 vector controllers as of version:
Type
E = Built-in unit
D = Push-through technique
C = Cold plate
Power
(e. g. 152 = 15 × 10
(e. g. 113 = 11 × 10
Voltage class
2 = 230 V
4 = 400 V/500 V
Version, variant
0xx = EMC filter integrated
2xx = Without EMC filter
x0x = Without function "Safe standstill"
x4x = With function "Safe standstill" (3 ... 11 kW)
xx0 = Not coated
xx1 = Coated
Hardware version
Software version
© 2003 Lenze Drive Systems GmbH
Without written approval of Lenze Drive Systems GmbH no part of these Instructions must be copied or given to third parties.
All information given in this documentation has been selected carefully and comply with the hardware and software described. Nevertheless, deviations
cannot be ruled out. We do not take any responsibility or liability for damages which might possibly occur. We will include necessary corrections in subsequent
editions.
Version
E82xV xxx
2
W = 1.5 kW)
3
W = 11 kW)
3.0 10/2003
K x C xxx 3x
55 Aerzen
3x
Hans-Lenze-Str. 1
‚ ƒ
D-31855 Aerzen
‚ ƒ
Inverter 8200 vector
Version:
Id.-No: Version:
Ser.-No:
Prod.-No:
Ser.-No:
Input:
1D74
Output:
For detailed information refer to the manual
EDK82EV222
Made in Germany
Type: _
K
