Lenze 8200 vector series Manual page 18

Show/Hide Bookmarks
Wiring according to EMC
Power connections
Wiring of the motor filter 230 V
Install the motor filter next to the controller in such a way that the connecting cable is as short
as possible:
– up to 200 mm the cable does not have to be shielded.
– from 200 mm a shielded cable must be used.
The cable from the motor filter to the motor is subject to the same rules as for the motor
cable.
1/N/PE AC 230 V
(2) 3/PE AC 230 V
8200 vector
U V W
Fig. 4 Wiring of the motor filter 230 V
Fig. 5 Mounting example of frequency inverter with motor filter
16
E82ZMxxx32B
U V W U1 V1 W1
M
3~
EDBEMV82EV EN 3.0
l