Omnitronic CMX-2000 User Manual page 53

31 FADER START
32 FX 1 ON
33 FX 2 ON
34 FX ON
35 FX DRY/WET
36 FX BUTTON 1
37 FX CONTROL 1
38 FX BUTTON 2
39 FX CONTROL 2
40 FX BUTTON 3
41 FX CONTROL 3
42 SAMPLER
34 SAMPLE 1 ON
35 SAMPLE 1 VOL
36 SAMPLE 2 ON
37 SAMPLE 2 VOL
38 SAMPLE 3 ON
39 SAMPLE 3 VOL
40 SAMPLE 4 ON
41 SAMPLE 4 VOL
43 DECK SWITCH
44 PITCH ‒
45 PITCH +
46 LOOP SIZE
LOOP ACTIVE
48 KEY LOCK
49 LOOP IN
50 LOOP OUT
51 ⊳ BEAT
52 BEAT
53 CUE
54 CUP
SW/ 1/2 Fader start on/off.
LED
SW/ 1/2 Beatgrid effect on/off.
LED
SW/ 1/2 Flanger effect on/off.
LED
SW/ 1/2 Starts and stops the effect
LED selected.
VR 1/2 Selects an effect from the list.
SW/ 1/2 Effect button 1.
LED
VR 1/2 Adjusts effect parameter 1.
SW/ 1/2 Effect button 2 (only supported in
LED selected effect plugins).
VR 1/2 Adjusts effect parameter 2.
SW/ 1/2 Effect button 3 (only supported in
LED selected effect plugins).
VR 1/2 Adjusts effect parameter 1.
SW/ 1/2 Activates the sampler function.
LED
SW/ 1/2 Play and stop sample 1.
LED
VR 1/2 Adjusts the volume of sample 1.
SW/ 1/2 Play and stop sample 2
LED
VR 1/2 Adjusts the volume of sample 2.
SW/ 1/2 Play and stop sample 3.
LED
VR 1/2 Adjusts the volume of sample 3.
SW/ 1/2 Play and stop sample 4.
LED
VR 1/2 Adjusts the volume of sample 4.
SW/ 1/2 -
LED
SW 1/2 Decreases speed by -2 %,
500 ms.
SW 1/2 Increases speed by -2 %, 500 ms. Seek +4 beats.
ENC 1/2 Determines the loop length.
SW 1/2 Starts and stops a loop.
SW/ 1/2 Key lock on/off. With the function
LED activated, the tonal pitch of the
title remains constant when the
speed is changed.
SW/ 1/2 Sets the starting point of a loop
LED or jumps back to the starting
point.
SW/ 1/2 Sets the end point of a loop
LED which is instantly started. Press
again to exit the loop
SW/ 1/2 Jump backward by 4 beats.
LED
SW/ 1/2 Jump forward by 4 beats.
LED
SW/ 1/2 Jumps back to the cue point.
LED Then start the playback with
Play/Pause (►II) or keep Cue
pressed to momentarily play the
title.
SW/ 1/2 For return and immediate start of
LED the playback from the cue point.
Launches a transition from
one video deck to the other.
Break effect on/off.
Backspin effect on/off.
-
-
-
-
-
-
-
-
Record and stop recording
sample 1.
-
Record and stop recording
sample 2.
-
Record and stop recording
sample 3.
-
Record and stop recording
sample 4.
-
Open scratch and mixer
window.
Seek -4 beats.
Moves the loop to the left or
right.
-
To manually set the BPM, tap
the button several times to the
beat of the music until the
determined BPM are
indicated.
-
-
Jump to previous cue point.
Jump to next cue point.
Timecode mode: Relative
Timecode mode: Absolut
53