Virtual DJ PRO
Prior to using Virtual DJ PRO, you will need to configure the software for use with the CMX-2000. Turn off
the controller and close Virtual DJ PRO.
Mapping Windows
1
Download the Virtual DJ PRO mapping from
the internet:
www.omnitronic.de
section of the product.
2
Copy and extract both XML files to your
computer (e.g. your desktop).
3
Copy each file into Virtual DJ's correspond-
ding default directory.
CMX-2000_Device.xml into:
Documents\VirtualDJ\Devices
CMX-2000_Mapping.xml into:
Documents\VirtualDJ\Mappers
4
Turn on the controller and launch Virtual DJ
PRO. If you have followed the previous
steps, Virtual DJ PRO should detect the
CMX-2000. You can verify this by opening
the [Mapper] tab in the configuration menu
(CONFIG/Mappers). The controller should
be indicated as the selected device in the
drop-down menu.
CMX-2000 Setup
Virtual DJ PRO offers various audio configuration options ( page 48). The following section shows the
corresponding settings required at the CMX-2000.
Configuration Switch position
Internal mixer
Input selector [5]: USB
Selector MIXER MIDI [29]: ON
External mixer Input selector [5]: USB
Selector MIXER MIDI [29]: OFF
Mapping Mac OS
1
download
2
3
4
Configuration Switch position
Timecodes
Inputs
47
Download the Virtual DJ PRO mapping from
the internet:
www.omnitronic.de
section of the product.
Copy and extract both XML files to your
computer (e.g. your desktop).
Copy each file into Virtual DJ's correspond-
ding default directory.
CMX-2000_Device.xml into:
Documents\VirtualDJ\Devices
CMX-2000_Mapping.xml into:
Documents\VirtualDJ\Mappers
Turn on the controller and launch Virtual DJ
PRO. If you have followed the previous
steps, Virtual DJ PRO should detect the
CMX-2000. You can verify this by opening
the [Mapper] tab in the configuration menu
(CONFIG/Mappers). The controller should
be indicated as the selected device in the
drop-down menu.
Input selector [5]: DVS
Selector MIXER MIDI [29]: OFF
Input selector [5]: DVS
Selector MIXER MIDI [29]: OFF
download