Printer Sharing; Connect Your Usb Printer To The Tg788V V3 - Technicolor TG788v v3 Setup And User Manual

5.2 Printer sharing

Introduction
A TG788v v3 USB port allows you to share your USB printer in your local network. This way everyone in your network can
use the same printer without having to buy an expensive network printer.
Requirements
The samba server must be enabled on the TG788v v3 (this is the default setting).
For more information, see
Procedure
Proceed as follows:
1 Connect your USB printer to the TG788v v3. For more information,
page 62.
2 Configure the printer sharing service on your TG788v v3.
For more information, see
3 Install the printer on your computer.
For more information, see
5.2.1 Connect your USB printer to the TG788v v3
Plug the USB cable of your printer in (one of) the USB port(s) of your TG788v v3.
DMS3-CTC-25-281 v2.0
"Customizing the content sharing settings" on page
"5.2.2 Enable the printer sharing service on your TG788v v3" on page
"5.2.3 Installing the printer on your computer" on page
5 Content and Printer Sharing
59.
"5.2.1 Connect your USB printer to the TG788v v3" on
63.
64.
62