2.2 Connecting your TG788v v3 to your service provider's
network
Introduction
This section helps you to connect your TG788v v3 to your service provider's network.
Connecting the cables
Proceed as follows:
1 Take the DSL cable.
Only use the DSL cable provided in your package. Other DSL cables may not work optimally with the DSL
subscription that you purchased.
2 Plug one end of the cable in the grey DSL port on the back of your TG788v v3.
3 If your delivery:
Does not include a DSL splitter, plug the other end of the DSL cable into your telephone wall socket.
Includes a DSL splitter, plug the other end of the DSL cable into the DSL/Modem port of the DSL splitter. Plug the
(LINE) cable of the DSL splitter into your telephone wall socket.
A splitter/filter is a box that typically has the following connectors:
• A Line input
• A Phone/PSTN output
• A DSL/Modem output (optional)
DMS3-CTC-25-281 v2.0
DSL
2 Setting up your TG788v v3
15