Switching The Vibration On And Off - Bomag BW 80 AD-5 Operating Instructions Manual

Operation
5.10 Switching the vi-
bration on and off
Caution
!
Switch the vibration on only at
maximum engine speed.
i
Note
Vibration at standstill causes trans-
verse ruts, therefore:
switch the vibration on only after
l
shifting the travel lever to the de-
sired travel direction.
Switch the vibration off before
l
stopping the machine.
Caution
!
Danger of bearing damage!
Do not activate the vibration on
hard (frozen, concrete) ground.
Danger
!
Risk of damage!
When compacting with vibration
you must check the effect of near-
by buildings and underground
supply lines (gas, water, sewage,
electric power), if necessary stop
compaction with vibration.
90 BOMAG
Pre-selecting the drum
Fig. 71
Use the rotary switch for drum pre-
l
selection (Fig. 71) to pre-select
the desired drum(s).
i
Note
The rotary switch for drum pre-selec-
tion is not installed in ACM-machines
and SCC-machines.
i
Note
The drum pre-selection can only be
changed after the vibration has been
switched off.
1 not on ACM/SCC-machines
1
462095
BW 80 AD-5 Fam.