Table of Contents
Advertisement
Page 18
SR-112 User Manual (Rev 4.01)
13. Firmware Updates
13.1. FIRMWaRE UPDaTE PaGE
Clicking on the UPDaTE FIRMWaRE button of the main HTML page takes you to
another page, strictly dedicated to uploading new firmware.
To update your firmware, click on the BROWsE button and select the firmware file
on your hard disk (.upld). Then click UPLOaD. The normal programming sequence
will follow.
Messages in the Upload status box at the bottom of the page keep you informed of
the progress (see programming sequence below), including error messages.
13.2. COMPLETE Vs sOFTWaRE
When downloading firmware updates from the Brainstorm website, 2 types of
image files are available: complete and software.
The sR-112 FLasH memory is divided in several sections, for the parameters settings,
the application software, the Loader software and the FPGa image. The diagram
below shows the difference between 'complete' and 'software' updates.
Advertisement
Table of Contents
