Instructions For Safe Operations; Warning; Attention - Contec CMS50F User Manual

1 1 1 Safety
1.1 Instructions 1.1 1.1

that may affect patient's safety and monitoring performance about cables and transducers. It is
recommended that the device should be inspected once a week at least. When there is obvious
damage, stop using the device.

permitted to maintain it by themselves.

accessory that appointed or recommendatory by manufacture can be used with this device.

1.2

1.2 Warning

1.2

some ignitable anesthetic agents.


device which is due to the looseness of the wristband in the process of using. Users who are allergic
to the wristband is not recommended to use it.


bags, foams and paper boxes) should follow the local laws and regulations.

accordance with the packing list, or else the device may have the possibility of working abnormally.

manufacturer, or else it may damage the device.


1.3 1.3

1.3 Attention


temperature and moisture.


immediately.


User Manual in the relative chapter (7.1)for instructions of cleaning and disinfection.

with medical alcohol by soft material. Do not spray any liquid on the device directly.


the patients' SpO
Downloaded from www.Manualslib.com
Safety
Safety
Instructions for Instructions for for safe safe safe operations operations operations
Check the main unit and all accessories periodically to make sure that there is no visible damage
Necessary maintenance must be performed by qualified service engineers ONLY. Users are not
The oximeter cannot be used together with devices not specified in User's Manual.Only the
This product is calibrated before leaving factory.
Warning
Warning
Explosive hazard—DO NOT use the oximeter in environment with inflammable gas such as
DO NOT use the oximeter while the testee measured by MRI and CT.
Please do not break the wristband, for fear it becomes out of use, or the unexpected drop of the
The person who is allergic to rubber can not use this device.
The disposal of scrap instrument and its accessories and packings(including battery, plastic
Please check the packing before use to make sure the device and accessories are totally in
Please choose the accessories and probe which are approved or manufactured by the
The device can only be matched with the compatible probe.
Please don't measure this device with function test paper for the device's related information.
Attention Attention
Keep the oximeter away from dust, vibration, corrosive substances, explosive materials, high
If the oximeter gets wet, please stop operating it.
When it is carried from cold environment to warm or humid environment, please do not use it
DO NOT operate keys on front panel with sharp materials.
High temperature or high pressure steam disinfection of the oximeter is not permitted. Refer to
Do not have the oximeter immerged in liquid. When it needs cleaning, please wipe its surface
When cleaning the device with water, the temperature should be lower than 60℃.
As to the fingers which are too thin or too cold, it would probably affect the normal measure of
and pulse rate, please clip the thick finger such as thumb and middle finger deeply
2
manuals search engine
1