5 Windows NT
5.1
Installing SSP-100
To allow easy configuration of the SSP-100 the Quatech Device Manager for Windows NT has
been written for the hardware. This configuration utility supports the SSP-100 only in block
addressing mode.
To begin the installation, open Windows Explorer and search for the 'Setup.exe' command to
install the Quatech Device Manager. <See following Windows Explorer figure.> (D:\Serial Port
Adapters\Drivers\Windows NT 4.0 for PCI, PCMCIA,ISA). Once the installation is complete an
icon will be placed on the desktop.
Windows NT Explorer
Windows NT
5-1