Yeastar Technology TG200 User Manual page 10

No. Feature
①
Reset Button
②
Power LED
③
RUN LED
④
LAN Port
⑤
WAN Port
GSM/3G Module
⑥
LED
⑦
SIM Card Slot
TG800 Gateway Back Panel
No. Feature
①
Antenna Connector Connect to GSM/3G Antenna.
②
Power Switch
②
Power Interface
③
Grounding Earth
Press and hold for 10 seconds to restore the factory defaults
Indicates the power status.
On: the power is switched on.

Off: the power is switched off.

Indicates the system status.
Blinking Green: the system is working properly.

Static Green/Off: the system goes wrong.

10/100 adaptive RJ45 Ethernet port.
10/100 adaptive RJ45 Ethernet port.
Indicates the GSM/3G module status.
Static Green: the module and the inserted SIM card are working

properly.
Blinking Slowly: no SIM card is detected or the port is working

improperly.
Blinking Quickly: there is an ongoing call on the port.

Off: no module is inserted or the module is damaged.

Insert the SIM card to the SIM card slot.
Press this button to switch on/off the device.
Connect the supplied power supply to the port.
Protects the personnel and the equipment.
TG Series User Guide
Description
Description
10/86