3. Plug the scanner into the power outlet (AC adapter is included in the shipment)
4. Download PhoXi® Control application from the Photoneo webpage:
http://www.photoneo.com/product-detail/phoxi-control-application/
it
5. Run the PhoXi® Control application and try to make your first scan. Please
refer to Configuration, page 13.
Separate the PhoXi® 3D Scanners from heat, high voltage, and
electrical noise
As a general rule for laying out the devices of your system, always separate the
devices that generate high voltage and high electrical noise from the low-voltage,
logic-type devices such as the PhoXi® 3D Scanner. When configuring the layout of
the PhoXi® 3D Scanner, consider the heat-generating devices and locate the
electronic-type devices in the cooler areas. Reducing the exposure to a high-
temperature environment will extend the operating life of any electronic device.
Consider also the routing of the wiring for the devices in the panel. Avoid placing low-
PhoXi® 3D Scanner - User manual and Installation instructions – 01/2018, rev.3
image 3: Connection of scanner
and install
11
Need help?
Do you have a question about the PhoXi and is the answer not in the manual?