Ptz; System; General - LG LRA3040N-NH Owner's Manual

34 Installation

PTZ

3 • Channel: Select the channel you want.
• Protocol: Select the protocol supported by the PTZ camera.
(Supported PTZ protocols are Pelco-D, Pelco-P, a COAX.)
• Baudrate: Select a transmisson rate.
• DataBit: Select the DataBit for RS-485 transmisson.
• StopBit: Set the limit. The StopBit added to the last asynchronous
communication data.
• Parity: Select the desired parity value. The parity bit is added to the
data for parity check.
• Tour: Select [Enable] or [Disable].
• Address: Set the address. (Address range: 1 ~ 255)
• Copy: Copy a particular channel settings to another channel or all
channels.
Save: Click [Save] button to confirm the settings.
Note
COAX protocol is a protocol for controlling the camera settings.
PTZ, preset settings and tour may not operate normally.

System

General

General
• Date: Click the calendar icon to select the current year, month
and day.
• Time: Enter the current time.
• Date Format: Select the date display format from the
drop-down list.
• Time Format: Select the time display format from the
drop-down list.
• Language: Select the language from the drop-down list.
• Video Format: Select the video format from the drop-down list.
• Menu Timeouts: If there is no change for menu during setting
time, the menu screen will be turned off.
• Show wizard: When you select it, the Startup Wizard is started
every time the system is rebooted.
Note
If you disable the Show wizard, you can not see the Show
wizard when reboot the system.
Save: Click [Save] button to confirm the settings.