Ptz Control - LG LE1004 Use Manual

Chapter 2 Functional description

2-4. PTZ Control

It is used to control PTZ camera which is connected at RS-485 port. Settings of

camera and DVR should be done if you are to control PTZ camera.
1. Click the icon
2. Control the PTZ camera using each item below.
① Click this button to close the PTZ control window.
② Click this spin control to select PTZ camera. (1~4)
③ Click this spin control to specify the moving speed of PTZ camera (1~6).
④ Click this button to show the OSD menu of camera.
※
⑤ Click these direction buttons to pan or tilt camera.
⑥ Click to control zoom in or out.
⑦ Click to control the focus of camera manually.
⑧ Click to control the iris of camera manually.
⑨ Click to select preset number.
⑩ Click to move to selected preset position.
⑪ Click to set current position as a new preset position.
⑫ Click to delete specified preset number.
⑬ Click to start touring, which function traverse each preset position one by one
according to dwell time.
2-26
Supported cameras : LG-Multix, LG-Multix_E, Pelco-D, Pelco-P
to control PTZ.