LG LRA3040N-NH Owner's Manual page 28

28 Installation
Email
• Email: Select [Enable] or [Disable].
3
• SSL: Select [Enable] or [Disable].
• SMTP Port: Enter the SMTP port number. It recommend to change
this port number for added flexibility or security.
• SMTP Server: Enter the SMTP server address.
• Sender: Enter the E-mail address of Sender.
• Sender Password: Enter the Sender Password.
• Receiver: Enter the E-mail address of Receiver.
• Interval: Select a interval.
• Test Email: Select [Test Email] to check sent mail.
Save: Click [Save] button to confirm the settings.
Note
SMTP Port, SMTP server, sender, or password settings are optional.
This unit can send an E-mail without using SMTP server or the
MTA (Message Transfer Agent). If you send an E-mail to a specific
SMTP server, you have to specify the server host name or IP
address. Inquire of the network service providers or the network
administrator about SMTP setting.
Email Schedule
• Channel:
1. Select the channel you want.
2. Select the mode [Motion Detection / Exception]
3. Drag and drop with left button of the mouse to set the time
you want to record.
Note
• E-mail schedule can be set by the week.
• Green: It send E-mail when detected motion.
Red: Mail will be sent, when the below situation,
such as lack of capacity, damage and loss of the
recorded files on hard disk occurs.
• Copy: Copy a particular channel settings to another channel or all
channels.
Save: Click [Save] button to confirm the settings.