22
Installation
Selecting the Spot Monitor screen mode
You can select the live screen mode to full, 4-split, 9-split, 16-split or
25-split screens on the spot monitor.
1. Press VIEW or click the
2. Select [Spot Monitor].
3. Select a screen mode.
3
Screen split mode
•
Full Screen Mode: You can view the live window in full
screen mode.
•
4, 9, 16 and 25 Split Mode: Displays selected split screens on
the spot monitor.
•
Sequence: You can view all the channels in sequence. You
cannot use sequence mode with the 25 split (LRH7080D
series: 16 split).
4. Select [OK] and press OK to confirm your selection.
NOTE
The image of IP Camera's on Spot Channel may not be operated
smoothly during playback.
icon in the system control bar.
Sequence mode
Grouping channel
You can group channels you want.
1. Press CAM or click the
icon in the system control bar.
2. Select [Main Monitor] or [Spot Monitor] on the menu.
3. Select a camera number for including group.
-
[Restore to Default] : Reset channels to ascending sort and
change the [Split Mode] to 25 split. (LRH7080D series: 16
split)
4. Select group number on the drop-down list.
5. Click [Load] or [Save] button to configure your group.
6. Select [OK] and press OK to confirm your selection.
NOTE
The [Split Mode] changes according to a number of selected
cameras.
PTZ Camera Control
You can control the cameras connected via the data port of RS-485
terminal or Network. You must set the configuration between the
PTZ camera and the DVR.
1. Select the PTZ camera channel on the main monitor you want
to control.
2. Press PTZ or click the
icon that appears when the mouse is
moved to PTZ camera's screen.
Virtual PTZ remote control is displayed on the main monitor.
3. Use each item to control the PTZ camera.
Button
Displays the PTZ control guide.
Displays the setup menu of the PTZ
camera.
Minimizes PTZ virtual remote control.
Removes the PTZ virtual remote
control.
Use to pan/tilt the camera.
You can select the Pan/Tilt/Zoom
speed.
You can adjust the camera zoom.
Function