Table of Contents
Advertisement
Grouping channel
You can group channels you want.
1. Press CAM or click the
icon in the system control bar.
2. Select a camera number for including group.
-
[Restore to Default] : Reset channels to ascending sort and
change the [Split Mode] to 25 split.
3. Select group number on the drop-down list.
4. Click [Load] or [Save] button to configure your group.
5. Select [OK] and press OK to confirm your selection.
NOTE
The [Split Mode] changes according to a number of selected
cameras.
PTZ Camera Control
You can control the cameras connected via Network.
1. Select the PTZ camera channel on the main monitor you want
to control.
2. Press PTZ or click the
icon that appears when the mouse is
moved to PTZ camera's screen.
Virtual PTZ remote control is displayed on the main monitor.
3. Use each item to control the PTZ camera.
Button
Displays the PTZ control guide.
Displays the setup menu of the PTZ
camera.
Minimizes PTZ virtual remote control.
Removes the PTZ virtual remote
control.
Use to pan/tilt the camera.
You can select the Pan/Tilt/Zoom
speed.
You can adjust the camera zoom.
You can adjust the focus of a camera
manually.
You can adjust the iris of a camera
manually.
You can use some options by clicking the right button of the
mouse in PTZ camera control mode.
•
•
The IP camera which is connected by Onvif driver is not supported
Focus and Iris function on the PTZ operation.
Function
Displays or disappear the preset
control options in the virtual PTZ
remote control
Displays the Selected Preset number.
To input the preset number.
y
To register preset positions.
To delete a memorized preset
r
position.
To move the camera to the preset
t
position.
u
To start a preset tour.
Confirm the preset position.
NOTE
PTZ Control Guide: Shows the guide for using the mouse.
Exit: Exits from the PTZ camera control mode.
Installation
21
3
Advertisement
Table of Contents
