Preparation And Assembly Of The Door - Zanussi ZWI 71201 WA User Manual

BUILDING IN
OVERVIEW
This appliance has been designed to be built into
the kitchen furniture. The recess should have the
dimensions shown in the picture below:
600 mm
min.
560 mm
min.
830 mm
75 mm
60 mm
We recommend that you keep the
packaging and the transit bolts for any
movement of the appliance.
Installing anti-tiliting device
If the height of the counter is 820 mm
or lower, you cannot install the anti-
tilting device.
Remove the screws of the top cover on the rear of
the appliance and install the anti-tilting device as
shown in the drawing.
596 mm
555 mm
170 mm
100 mm
818 mm
Adjust the anti-tilting device so that the distance
from the counter is 10mm. Loosen the nut
counterclockwise with a 3mm wrench. Adjust the
height and turn the nut clockwise to fix it.
PREPARATION AND ASSEMBLY OF THE
DOOR
The appliance is originally prearranged for the
assembly of a door opening from right to left (see
picture below)
~10mm
21