Zanussi ZWI 71201 WA User Manual
  1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Washer
  5. ZWI 71401 WA
  6. User manual

Zanussi ZWI 71201 WA User Manual

Front-loading washing machine
Hide thumbs Also See for ZWI 71201 WA:
Table of Contents

Advertisement

Quick Links

User manual
EN
Washing Machine
ZWI 71201 WA
ZWI 71401 WA

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZWI 71201 WA

Summary of Contents for Zanussi ZWI 71201 WA

  • Page 1 User manual Washing Machine ZWI 71201 WA ZWI 71401 WA...

  • Page 2: Table Of Contents

    • If the appliance has a child safety device, we recommend you acti- vate it. General Safety • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not change the specification of this appliance. www.zanussi.com...

  • Page 3: Safety Instructions

    Electrical connection • The appliance is to be connected to the wa- Warning! Risk of fire and electrical shock. ter mains using the new supplied hose-sets. Old hose sets must not be reused. • The appliance must be earthed. www.zanussi.com...

  • Page 4: Product Description

    Rating plate Drain pump Adjustable feet Child safety Make sure that children or pets do not climb in- to the drum. To prevent children and pets be- coming trapped inside the drum this machine in- corporates a special feature. www.zanussi.com...

  • Page 5: Control Panel

    On the following page there is a picture of the control panel. It shows the programme selector dial as well as the buttons, pilot lights and the display. These are presented by relevant num- bers on the following pages. www.zanussi.com...
  • Page 6 (extra rinse), select this option. soiled laundry and at the same time save ener- Some additional rinses will be performed. This option is recommended for people who are al- www.zanussi.com...
  • Page 7 • End of programme When the programme has finished the flash- ing zero ( ) is displayed. The pilot light 9 and the pilot light of button 7 go out. The door can be opened. The display shows the following information: www.zanussi.com...

  • Page 8: Washing Programmes

    Note: A single or bulky item may cause imbalance. If the appliance doesn’t perform the final spin phase, add more items, redistribute the load manually and then select the spinning programme. www.zanussi.com...
  • Page 9 At the end of the soak (after having emptied out the water) you can select the washing programme (first turn the programme selector dial to , then to the programme and press the button 5). www.zanussi.com...
  • Page 10 3) If you select the Super Quick option by pressing button 3, we recommend that you reduce the maximum load as indicated. Full loading is possible however with somewhat reduced cleaning results. 4) Max. load with Easy iron option 1.5 kg 5) If using liquid detergents, a programme without PREWASH must be selected. www.zanussi.com...

  • Page 11: Consumption Values

    Rub particularly soiled areas with a special de- Never wash whites and coloureds together. tergent or detergent paste. Whites may lose their whiteness in the wash. Treat curtains with special care. Remove hooks or tie them up in a bag or net. www.zanussi.com...
  • Page 12 When the degree of hardness is soft, the delicate balance of nature. readjust the quantity of the detergent. 1) do not use acetone on artificial silk www.zanussi.com...

  • Page 13: First Use

    There is a door handle out- risk of water leakage wards. Place the or damage to the laundry in the drum, laundry. one item at a time, shaking them out as much as possible. Close the door. www.zanussi.com...
  • Page 14 You can cancel or modify the delay time at any speed provided for that programme. (See moment, before you press button 7. "Washing programmes" for the maximum al- Selecting the delay start : lowed spin speed). www.zanussi.com...
  • Page 15 Press the button again to restart Remove the laundry from the drum and carefully the programme. check that the drum is empty. If you do not in- www.zanussi.com...

  • Page 16: Care And Cleaning

    • If it is necessary, wait until the water has downwards and by tive compartment cooled down. pulling it out. Flush it should be removed. out under a tap, to re- move any traces of accumulated powder. www.zanussi.com...
  • Page 17 • Clean the filter in the valve with a stiff brush Replace the filter into or with the piece of cloth. the pump by inserting it correctly into the special guides. Screw the pump cover firmly by turning it clock- wise. www.zanussi.com...

  • Page 18: What To Do If

    7 blinks, one of the fol- Service Centre. lowing alarm codes appears on the display and some acoustic signals sound every 20 seconds to indicate that the machine is not working: www.zanussi.com...
  • Page 19 An option or a programme that ends with the water still in the tub or a and/or does not spin: that eliminates all the spinning phases has been selected. • Select the draining or spinning programme. The laundry is not evenly distributed in the drum. • Redistribute the laundry. www.zanussi.com...
  • Page 20 In this case, redistribute the load manually and select the spin pro- machine does not spin: gramme. • Redistribute the laundry. The load is too small. • Add more items, redistribute the load manually and then select the spinning programme. www.zanussi.com...

  • Page 21: Technical Data

    1400 rpm (ZWI71401WA) Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. www.zanussi.com...
  • Page 22 Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. www.zanussi.com...
  • Page 23 Caution! The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use. www.zanussi.com...
  • Page 24 SHOWER SINK TOILET BATH BIDET 2. Onto a sink outlet spigot. WASHING DISHWASHER MACHINE RAINWATER ‘RUN-OFF’ FOUL DRAIN SURFACE WATER FOUL SEWERS DRAINS & SEWERS Loop SEWAGE TREATMENT UNTREATED WORKS DISCHARGE TREATED DISCHARGE RIVER RIVER www.zanussi.com...

  • Page 25: Building In

    This will help to prevent the hoses from be- coming kinked or trapped. Caution! Do not remove the screw 8! www.zanussi.com...

  • Page 26: Front View

    Graphic F 5 mm Hardwood strip Additional pieces of timber should run from front to back 600-605 Front view Caution! Do not remove the screw 8! www.zanussi.com...

  • Page 27: Environment Concerns

    Help protect the environment and human health Packaging materials and to recycle waste of electrical and electronic The materials marked with the symbol are re- appliances. Do not dispose appliances marked cyclable. www.zanussi.com...
  • Page 28 • Measure out detergent according to the wa- environment, we recommend that you follow ter hardness, the degree of soiling and the these tips: quantity of laundry being washed. • Normally soiled laundry may be washed with- out prewashing in order to save detergent, www.zanussi.com...
  • Page 29 www.zanussi.com...
  • Page 30 www.zanussi.com...
  • Page 31 www.zanussi.com...
  • Page 32 www.zanussi.com/shop...

Table of Contents