Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZWI 2105
Summary of Contents for Zanussi ZWI 2105
-
Page 1: Washing Machine
LAVADORA WASHING MACHINE ZWI 2105 MANUAL DE USO USER MANUAL 132984080... -
Page 2: Table Of Contents
Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. Transport damages When unpacking the appliance, check that it is not damaged. -
Page 3: Warnings
Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation • Always unplug the appliance and shut the water tap after use. • All internal packing must be removed before using the appliance. -
Page 4: Disposal
Disposal Packaging materials The symbol on the product or on its packaging The materials marked with the symbol indicates that this product may not be treated as recyclable. household waste. Instead it shall be handed over to >PE<=polyethylene the applicable collection point for the recycling of electrical and electronic equipment. -
Page 5: Installation
Installation Unpacking 6. Set the machine upright and remove the two remaining bolts from the back. All transit bolts and packing must be removed 7. Pull out the three plastic spacers from the holes before using the appliance into which the bolts were fitted. 8. -
Page 6: Water Drainage
The other end of the inlet hose which connects to the Directly into a drain pipe at a height of not less machine can be turned in any direction. Simply than 60 cm and not more than 90 cm. loosen the fitting, rotate the hose and retighten the The end of the drain hose must always be fitting, making sure there are no water leaks. -
Page 7: Building In
Building-in This appliance has been designed to be built into the kitchen furniture. The recess should have the dimensions shown in picture A. c) Mounting the door Fix the hinges to the machine by means of the M5x8 screws (3-Fig. B). The hinges can be adjusted to compensate for possible uneven thickness of the door. -
Page 8: Your New Washing Machine
Your new washing machine This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. • The temperature selector dial will allow you to choose the most suitable temperature for your laundry. •... -
Page 9: Use
Control panel 1 Detergent dispenser drawer 5 Anti-crease button The programme chart is in the interior part of the Using this option the last rinse water is not emptied drawer. out, so as to avoid creasing if the laundry is not removed from the machine immediately after washing. -
Page 10: Washing Hints
Washing hints Sorting the laundry Cotton, linen: drum full but not too tightly packed; Synthetics: drum no more than half full; Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Delicate fabrics and woollens: drum no more than Sort the laundry as follows: one third full. -
Page 11: Detergents And Additives
Mould stains: treat with bleach, rinse well (whites Pour liquid detergent into the dispenser drawer and fast coloureds only). compartment marked just before starting the programme. Grass: soap lightly and treat with bleach (whites and fast coloureds only). Any fabric softener or starching additives must be poured into the compartment marked before Ball point pen and glue: moisten with acetone (*),... -
Page 12: International Wash Code Symbols
International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max. wash temperature temperature temperature temperature 95°C 60°C 40°C 30°C Hand wash Do not... -
Page 13: Operating Sequence
Operating sequence Before washing your first load of laundry, we recommend that you run a cotton cycle at 90°C, with 4. Select the required option(s) the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine. -
Page 14: Washing Programmes
Programme table Washing programmes for cotton and linen Load: 5 kg Consumptions Additional Programme Temp. Fabrics functions Energy Water Duration min. 60° - 90° WHITES WITH PREWASH, for example work garments, sheets, household linen, underwear, towels 60° - 90° WHITES WITHOUT PREWASH, for example household linen, sheets, shirts, underwear COLOUREDS WITHOUT... - Page 15 Programme table Washing programmes for synthetics, mixed fabrics, delicates and wool Load: 2 kg, wool 1 kg Consumptions* Additional Programme Temp. Fabrics functions Energy Water Duration min. 30°-60° SYNTHETICS WITH PREWASH, for example underwear, coloured items, shirts, blouses 0.70 SYNTHETICS WITHOUT PRE- 30°-60°...
-
Page 16: Maintenance
Maintenance 1. Bodywork Place a container under the filter and unscrew it. Clean the outside of the machine with warm water and a neutral, non-abrasive household detergent. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork. -
Page 17: Emergency Emptying Out
5. Emergency emptying out If the water is not discharged (outlet pump is blocked, filter or drain hose are clogged), proceed as follows to empty out the machine: • pull out the plug from the power socket; • close the water tap; •... -
Page 18: Something Not Working
Something not working? Problems which you can resolve yourself. Problem Possible cause • The machine does not start up: • The door is not firmly closed. • The machine is not plugged in or there is no power at the socket. •... - Page 19 Problem Possible cause • Spinning starts late or the machine • The electronic unbalance detection device has cut in because the laundry is not evenly distributed in does not spin: the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume.