Electrical Connection; Building-In; Preparation And Assembly Of The Door - Zanussi FI 873 Instruction Booklet

Electrical connection

Before connecting the machine check that the
mains voltage corresponds to the voltage given in
the technical specifications.
Check that your domestic electrical installation
can take the maximum load required, also taking
into account any other appliances in use.
Connect the machine to an earthed socket, in
accordance with current wiring regulations.
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the above
safety precaution.

Building-in

This appliance has been designed to be built into
the kitchen furniture.
The recess should have the dimensions shown in
picture A.

Preparation and assembly of the door

The machine is originally pre-arranged for the
assembly of a door opening from right to left.
In this case it is sufficient to screw in the hinges
(1) and the counter-magnet (6) provided with the
appliance, at the right level (Fig. B).
P0965
6
1
7
2
1
3
3
8
2
P0982
A
4
5
B
29