Connecting A Power Cord; Installing The Lto Driver; Registering Your Tape Drive - Quantum Tape Drive LTO-3 User Manual

Connecting a
2
Power Cord
Installing the LTO
2
Driver
Registering Your
2
Tape Drive
Attach the power cord securely to the power connector on the back of the
desktop LTO-3 Tape Drive (see
If you intend to use your drive with either the Microsoft Windows Server
2003, Windows XP, or Microsoft Windows 2000 operating system, install
the LTO driver. See the Resource CD.
commercial backup application software
After you install the desktop tape drive, be sure to register it. Registering
your drive ensures that you will receive the latest information about your
drive, as well as other product, service, and support information. For
your convenience, you can register your drive through our Web site at
www.quantum.com/registration.
LTO-3 Tape Drive User's Guide
Installing a Desktop LTO-3 Tape Drive
figure 9).
This driver is not necessary with
.
Chapter 2 Installation
21