View Options - Universal Audio Arrow Manual

View Options

The individual View Column Options
Overview for details about how to operate the Modifier controls.
Overview, Inputs, & Inserts View Options
The View Options for the Overview, Inputs, and Inserts Views are
identical. Each option is described below.
Note: In the Overview View Column, the Power, Remove, and Copy
modifiers may not be visible if the Console window size is vertically
condensed. To bring all Overview modifiers into view, increase the
vertical window size if possible, or select a different View.
Power Modifier
This option toggles an individual plug-in's power state within a single
insert. When disabled, the plug-in no longer uses UAD DSP resources.
Click the POWER modifier switch to latch the option, then toggle any
plug-in's power state by clicking its modifier, or swipe across multiple
modifiers.
Note: This option performs the same function as the
header within the plug-in editor window.
When POWER is latched, disabled plug-ins are indicated by a gray modifier icon, and
active plug-ins have a green modifier icon.
The POWER modifier when latched. Plug-ins are shown powered (left) and disabled (right).
Because this function unloads and loads the plug-in from the DSP, audio artifacts can
occur if the power state is changed while audio is being processed by the plug-in.
Tip: To disable individual plug-in processing without audio artifacts, use the power
control within the plug-in interface instead, which keeps the plug-in loaded on the
DSP.
Arrow Manual
are detailed in this section. See the
Plug-In Power
98
Modifiers
Overview, Inputs,
& Inserts View
modifier switches
switch in the
Console Reference
View
Options