Device Name Display
The
Device Name
of the interface is displayed in the INPUT and OUTPUT columns so
each unit can be readily identified in multi-unit setups. Each device is color-coded for
easier identification.
Cascade Switch
Note: The Cascade function is generally not of practical use with Arrow. The
function is typically used with Apollo devices and/or multi-unit systems that have
higher I/O channel counts.
The Cascade switch is used to quickly assign continuous I/O channels if routings have
been changed from default values.
Note: Cascade doesn't do anything when the
because all channels are already continuous in default mode.
When Cascade is clicked, the Cascade switch and all channel numbers are illuminated.
Click+hold any channel number, then swipe down adjacent channel numbers to quickly
assign the channel(s) to the next available channel(s) in the device.
Tip: Increase the vertical size the Console Settings window to view more channels
simultaneously, so more channels can be swiped.
Using Cascade to quickly assign multiple channels. In this example, ADAT 1 has been
previously assigned to LINE 1 (left screenshot). With Cascade engaged (right screenshot),
swiping the ADAT output across the LINE outputs quickly reassigns the LINE outputs to
Arrow Manual
Mode Menu
1. Click+Hold
channel
number
2. Swipe Down
channel
numbers
ADAT outputs.
168
displays "Default"
Console Settings