Uad Meter Window - Universal Audio Arrow Manual

UAD Meter Window

Refer to the illustration below for descriptions in this section
Minimize
Quit
Open
Plug-Ins
Panel
Title Bar
The Title Bar (the strip across the top of the UAD Meter window) contains buttons to quit
the UAD Meter & Control panel application, minimize the UAD Meter window, and access
the Meter Menu.
Note: The Quit, Minimize, and Menu button positions shown above are as they
appear on Mac systems. These button positions are reversed on Windows systems,
reflecting the OS conventions.
Plug-Ins Panel Button
Clicking this blue button opens the Plug-Ins panel. It has the same function as selecting
"Plug-Ins..." from the Meter Menu.
UAD Resource Display
UAD plug-in loads are shown in the UAD Meter window. These three gauges (DSP, PGM,
and MEM) provide visual feedback, helping to determine which UAD plug-ins to use if
available UAD resources are limited.
The UAD resources are displayed as blue bar graphs and as percentages. These gauges
have no controls; they are visual indicators only.
Tip: The UAD Resource Gauges are also displayed in the Info Bar within Console.
Averaged Loads
The load for each gauge represents the average for all UAD devices in use. For example,
if a UAD-2 Satellite Thunderbolt OCTO is connected, the UAD DSP load is an average
of the eight DSP processors in the unit plus the single DSP within Arrow. If additional
UAD-2 accelerators are added, the average load is automatically adjusted.
Arrow Manual
DSP Load Meter Program Memory Meter
Memory Meter
UAD Meter window elements
197
Meter Menu
Averaged
Loads
UAD Meter & Control Panel