Applications Examples - QSC DSP-3 Hardware Manual

Digital signal processor amplifier accessory

Hide thumbs Also See for DSP-3:

Table of Contents

Section 2:

Installation-

Application Examples

The following examples show basic hook up information that assumes a two-channel, full range audio signal driving the load. Refer to your

amplifier's hardware manual for other output configurations. All audio signals are line level.

DSP-3 Directly Mounted to QSC Amplifier. Audio Inputs via Terminal Block Inputs

DSP-3 Directly Mounted to QSC Amplifier. Networked OR Local Control. Audio Inputs via DataPort.

NOTE: External accessory power supply may be required on older models, see page 2 for full application information.

Table of Contents