D-Link DSL-500 Command Reference Manual page 9

16. ip_filter
add
delete
flush
list
change
trace
17. isfs
ls
rm
cat
trace
version
18. itex
version
line
rate
mode
info
txgain
enhance
priority
alarm
getes
getsnr
getrsd
channelmgr
setcurve
trellis
bitswap
DSL-500 Console Commands Index and Syntax
help | <command> - set up rules for filter packets
help | <command> - delete set or rules for filter packets
help | <command> - flush all setting for filter packets
help | <command> - list setting for filter packets
help | <command> - change globe state on/off or
help | <command> - trun on/off ip filter
- list ISFS files
<file> - remove file from ISFS
<file> - show file contents
[level] - show/set tracing level
- displays version number
- display version of itex implementation
- Use up or down to activate/deactivate the line
- Get up/down stream rates
- Set mode [auto,ansi,dmt,lite]
- Get info
- Set/Get tx gain value
- Set enhance mode
- Set priority(ansi first or g.hs first)(0:ansi,1:g.hs)
- Get Alarm indication
- Get error second
- Get snr
- Get RSD
- Channel management
- Set curve
- Set Trellis 1/0
- Set Bitswap 1/0
ifnotmatch pass/block
9