D-Link DSL-500 Command Reference Manual page 14

version
welogin
ondemand
r2516
24. reflect
version
list
new
delete
25. restart
restart
26. snmp
access syntax:
snmp access [read | write] <community> [<IP addr>]
snmp access delete <community> [<IP addr>] - revoke specified access
snmp access flush
DSL-500 Console Commands Index and Syntax
user add <name> pwd <passwd> [pap|chap]:
create new user setting
user delete <name>|all:
delete user setting or all settings
- display version information for PPP
- <channel> welogin none | <name> <password>
[pap|chap]:
set our login details over this channel
- <channel> ondemand disable | enable [idle_secs]:
set pppoe connect-on-demand and idle seconds
before drop
over this channel
- <channel> r2516 <service name> <ac name> :
set pppoe service name and ac name over this
channel
- display the module version number
- list configured reflectors with index numbers
<filename> [filename] - create new reflector using
<index> | all - delete specified reflector or all reflectors
- restart system
- allow read-only or read-write access
specified file
- revoke all access
14