D-Link DSL-500 Command Reference Manual page 3

version
build
config <config_spec> - Enter manual configuration request
list config
list devices
list ports
list channels <port_name> - Display enabled channels on a port
list all open channels <port_name> - Display all open channels on a port
list spices
list objects
show system
set system
show device <device_name> - Display device information
show port <port_name>
show channel <port_name> <channel_number>
set port <port_name> / <attribute> = <value> - Set port attribute
set channel <portname> <channelnumber> / <attribute> = <value>
reset port <port_name>
list classes
show class <classname>
5. chips
cpu
debug
exit
info
mem
stack
rb
rh
rw
tell
DSL-500 Console Commands Index and Syntax
- Show software version
- Show build information
- Display all configuration requests
- Display registered driver devices
- Display registered ports
- Display all available spices
- Display all data objects
- Show system attributes
- Set system attributes
- Display port information
- Display channel information
- Set channel attribute
- Reset port hardware
- List available port classes
- Show class members
- print percentage of cpu cycles used
- enter debug process
- abort from ATMos
- print out version information and machine's address
- memory used on a process-by-process basis
- stack usage on a process-by-process basis
<addr> - read byte at address <addr>
<addr> - read halfword at address <addr>
<addr> - read word at address <addr>
<process> <string> - send string to process using TELL
message
3