D-Link DSL-500 Command Reference Manual page 13

event
hdlc
info
interface
lcpmaxconfigure - <channel> lcpmaxconfigure [<n>]:
lcpmaxfailure
lcpmaxterminate - <channel> lcpmaxterminate [<n>]:
llc
ports
pvc
qos
remoteip
svc
theylogin
tunnel
user
DSL-500 Console Commands Index and Syntax
in either pppoa or pppoe encapsulation
- event [<1-5>]:
set/read current event report level
- <channel> hdlc [1|0]:
set HDLC headers on this channel
- <channel> info [all]:
show information about this channel
- <channel> interface <n>:
attach channel to specified interface
interface <n> localip <ipaddr>:
set local IP address on specified interface
interface <n> stats
show statistics on specified interface
set/read current LCP Max Configure setting
- <channel> lcpmaxfailure [<n>]:
set/read current LCP Max Fail setting
set/read current LCP Max Terminate setting
- <channel> llc [1|0]:
set LLC headers on this channel
- ports:
display the available port names
- <channel> pvc [[[<port>] <vpi>] <vci>] [ip|mac] [listen]:
set PVC details for this channel
- <channel> qos [cbr|ubr] [pcr <pcr-tx> [<pcr-rx>]]:
set QoS details for this channel
- <channel> remoteip <ipaddr>:
set IP address for dial-in to this channel
- <channel> svc [listen|addr <addr>] [ip|mac]:
set SVC details for this channel
- <channel> theylogin [pap|chap|none]:
set login required to this channel
- <channel> tunnel <n> pptp|l2tp in|out:
associate <channel> with tunnel number <n>
- user:
list all user settings
13