D-Link DSL-500 Command Reference Manual page 7

device syntax:
device [list]
device add <i/f> <type> <file> [mtu <size>] [<IPaddr>|dhcp]
device delete <i/f>
device flush
disable syntax:
disable [<i/f>] - prevent use of interfaces or just interface <i/f>
enable syntax:
enable [<i/f> [mtu <size>] [<IPaddr>]]
help syntax:
help
help all
help <command>
ipatm syntax:
ipatm <cmd>
ipatm help
nat syntax:
nat add <i/f>
nat delete <i/f> - uninstall NAT from interface
norelay syntax:
norelay [all | <i/f name> [<i/f name>] [forward]]
ping syntax:
ping <host> [<ttl> [<size>]]
DSL-500 Console Commands Index and Syntax
- list interface definitions
- create interface definition
- remove interface definition
- remove all interface definitions
- enable use of all interfaces or interface <i/f> if given
- set <i/f> IP address to <IPaddr>
- set MTU for interface
- list commands available
- list commands and their syntax
- list syntax for command
- execute ipatm subcommand
- list subcommands available
- install NAT on interface
- disallow relaying between i/fs
- request echo from <host>
7