D-Link DSL-500 Command Reference Manual page 10

dyinggasp
vendorid
test
delay
list
minds
19. nat
event
interfaces
inbound
dmzip
dmzstate
info
protocols
sessions
stats
version
20. oam
version
config
trace
dl
21. oamcli
config
version
getversion
inf
list
DSL-500 Console Commands Index and Syntax
- Send DyingGasp
- Set vendorid
- test ITex135
- ANSI delay
- List current configuration
- Set/Get Minimum DownStream value
[<level>] - show or change current event tracing level
- list interfaces
help | <command> - set up rules for inbound packets
- show or set DMZ ip; Syntax: dmzip xxx.xxx.xxx.xxx
enabled | disabled - Enable or Disable or Show status of
DMZ
- show information about configured options
- list protocols supported via ALGs
<i/f name> [summary | all] - list active sessions
<i/f name> [reset] - show statistics
- display ATMOS NAT version
- show version
- show configuration
<util | fault | cc | loopback | all | none > - show / set tracing
- dump contents of lookup tables
- display message saying there is no storable configuration
- show oamcli version
- get the oam process version
- get a channels state
- list channels state
10