Assembly - Shark SV800 N 54 Owner's Manual

ASSEMBLY

H
A
I
J
K
D
C
E F
VACUUM COMPONENTS
A Main Body / Hand Vac
B Handle
C Dust Cup
D Dust Cup Release
E Motorized Brush
F Crevice Tool
G Charging Adapter
H Handle Release
I
Charging Jack
J ON/OFF switch
K Attachment Release
4 TOLL FREE: 1-800-798-7398
SV800 N54_E_IB_100823.indd 4
B
G
ASSEMBLY
1 Insert the motorized brush into
the vacuum body.
2 Insert the handle pole into the top
of the main body.
3 Store the crevice tool on the back
of the main body.
4 Ensure that the dust cup is
securely in place.
CHARGING
1 The charge adapter plug will
fit into the unit only one way.
Insert the charging adapter plug
by aligning the arrow on the
plug with the arrow next to the
charging jack on the back of the
unit (fig 1) .
fig. 1
fig. 2
fig. 3
2 Charge the unit for 24 hours before
using the vacuum for the first time.
3 Make sure the On/Off switch is in
the Off position (O) before plugging
in the charge adapter (fig. 2).
4 The charging light will illuminate
when the charge adapter is plugged
in properly (fig. 3).
5 After the initial 24-hour charge,
the time for a complete charge is
16 hours.
Leaving the vacuum plugged in
all the time will shorten its life.
Always unplug the charger when
the 16-hour charge time is
complete.
10-09-01 11:37 AM