Related Manuals for Shark SV800 N 54
Summary of Contents for Shark SV800 N 54
- Page 1 OWNER’S GUIDE SV800 N 54 www.sharkclean.com SV800 N54_E_IB_100823.indd 1 10-09-01 11:37 AM...
-
Page 2: Important Safety Instructions
FOLLOWED, INCLUDING THE FOLLOWING: 13 Always turn the vacuum off before connecting or disconnecting the motorized floor brush or crevice tool. READ ALL INSTRUCTIONS BEFORE USING YOUR SHARK ® CORDLESS STICK VACUUM. GENERAL USE: 14 Use only on dry, indoor surfaces. -
Page 3: Table Of Contents
38 Batteries are to be recycled or disposed of safely. 39 Use extra care when cleaning on stairs. for purchasing DUST CUP/FILTER: the Shark ® 40 Before turning on the vacuum: • Make sure that the dust cup and filter are securely in Cordless place after routine maintenance. -
Page 4: Assembly
ASSEMBLY fig. 1 fig. 2 fig. 3 VACUUM COMPONENTS ASSEMBLY 2 Charge the unit for 24 hours before using the vacuum for the first time. A Main Body / Hand Vac 1 Insert the motorized brush into 3 Make sure the On/Off switch is in the vacuum body. -
Page 5: Using Your Cordless Stick Vacuum
USING YOUR SHARK CORDLESS STICK VACUUM ® BARE FLOOR CLEANING USE YOUR CORDLESS STICK VACUUM TO CLEAN BARE FLOORS, CARPETS, RUGS, UPHOLSTERY AND MORE. CARPET CLEANING fig. 4 1 Place your foot lightly on the top • Push the switch to the “||”... - Page 6 USING YOUR SHARK CORDLESS STICK VACUUM ® fig. 7 fig. 6 fig. 5 YOUR CORDLESS STICK 2 Convert the stick vacuum to 3 To convert back to a stick VACUUM IS A VERSATILE a hand vacuum for a compact vacuum:...
-
Page 7: Care And Maintenance
CARE AND MAINTENANCE fig. 8 fig. 10 fig. 9 fig. 11 CAUTION: unplug the charging 3 Remove the dust cup cover by 6 Replace the dust cup into the adapter from outlet before any twisting it so that the arrowhead vacuum by first pushing in the servicing. - Page 8 CARE AND MAINTENANCE - cont. filter frame foam filter dust cup cover fig. 13 fig. 12 fig. 14 CLEANING THE FILTER CLEANING THE MOTORIZED 3 Rinse the filter in lukewarm water BRUSH AND CLEARING and squeeze the water out To ensure your vacuum lives (fig.
- Page 9 fig. 16 fig. 15 fig. 17 RESTARTING AFTER A JAM 3 Make sure you are working 5 Use a flashlight to inspect the in a well-lit area and turn the neck of the motorized brush and If your motorized brush becomes motorized brush over so you can inside the air duct at the bottom jammed, it will cease to operate.
-
Page 10: Troubleshooting Guide
TROUBLESHOOTING GUIDE & REPLACEMENT PARTS PROBLEM SUGGESTED SOLUTION Vacuum will not operate 1 The battery may be depleted. Charge for 16 hours, and ensure that the red charging indicator illuminates when the unit is plugged in. 2 See “Restarting after a jam” on page 9. Charging indicator does not 1 Check to see if the charge adapter is plugged in properly to the outlet and to illuminate... -
Page 11: Warranty And Registration
“ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice. PRODUCT REGISTRATION Please visit www.sharkclean.com or call 1-800-798-7398 to register your new Shark product within ten (10) days of ®... - Page 12 Copyright © 2010 Euro-Pro Operating LLC USA: Newton, MA 02459 CANADA: Ville St-Laurent, QC H4S 1A7 Printed in China Illustrations may differ with actual product. SV800 N 54_100823 www.sharkclean.com 1-800-798-7398 SV800 N54_E_IB_100823.indd 12 10-09-01 11:37 AM...
Need help?
Do you have a question about the SV800 N 54 and is the answer not in the manual?
Questions and answers
I need a replacement belt for the NV800 beater bar - can you send me specifications so I can get it back and running?