Table of Contents
Advertisement
Internet Sharing Gateway User Guide
Reset Button
Power port (12V)
WAN Data LED
LAN Data/Status
LED
DIP switches
This button has 2 functions:
•
When pressed and released, the Internet Broadband
Router will reboot (restart).
•
This button can also be used to clear ALL data and
restore ALL settings to the factory default values.
To restore the factory default values:
1.
Power Off
2.
Hold the Reset Button down while you Power On.
3.
Keep holding the Reset Button for a few seconds, until
the RED LED has flashed TWICE.
4.
Release the Reset Button. The Internet Broadband
Router is now using the factory default values.
Connect the power adapter here.
This will flash during normal operation, when data is
transmitted or received through the WAN port.
During normal operation, this will flash in Green. Orange
indicates an error. See the following LED Table for more
information.
Refer to the DIP Switches on page 7.
6
Advertisement
Table of Contents
