Configuration Program - Planet XRT-101A User Manual

Internet broadband router
Table of Contents

Advertisement

Configuration Program

The Internet Broadband Router contains an HTTP server. This enables you to connect to it, and
configure it, using your Web Browser. Your Browser must support JavaScript. The
configuration program has been tested on the following browsers:
Netscape V4.08 or later
Internet Explorer V4 or later
Preparation
Before attempting to configure the Internet Broadband Router, please ensure that:
Your PC can establish a physical connection to the Internet Broadband Router. The PC and
the Internet Broadband Router must be directly connected (using the switch ports on the
Internet Broadband Router) or on the same LAN segment.
The Internet Broadband Router must be installed and powered ON.
If the Internet Broadband Router's default IP Address (192.168.0.1) is already used by
another device, the other device must be turned OFF until the Internet Broadband Router is
allocated a new IP Address during configuration.
Connecting to the Internet Broadband Router
Using UPnP
If your Windows system supports UPnP, an icon for the Internet Broadband Router will appear
in the system tray, notifying you that a new network device has been found, and offering to
create a new desktop shortcut to the newly-discovered device.
Unless you intend to change the IP Address of the Internet Broadband Router, you can
accept the desktop shortcut.
Whether you accept the desktop shortcut or not, you can always find UPnP devices in My
Network Places (previously called Network Neighborhood).
Double - click the icon for the Internet Broadband Router (either on the Desktop, or in My
Network Places) to start the configuration. Refer to the following section Setup Wizard for
details of the initial configuration process.
Using your Web Browser
To establish a connection from your PC to the Internet Broadband Router:
1.
After installing the Internet Broadband Router in your LAN, start your PC. If your PC is
already running, restart it.
2.
Start your WEB browser.
3.
In the Address box, enter "HTTP://" and the IP Address of the Internet Broadband Router,
as in this example, which uses the Internet Broadband Router's default IP Address:
HTTP://192.168.0.1
Setup
11

Advertisement

Table of Contents
loading

Table of Contents