Table of Contents
Advertisement
Checking TCP/IP Settings - Windows 9x/ME:
1.
Select Control Panel - Network. You should see a screen like the following:
2.
Select the TCP/IP protocol for your network card.
3.
Click on the Properties button. You should then see a screen like the following.
Ensure your TCP/IP settings are correct, as follows:
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows settings.
Restart your PC to ensure it obtains an IP Address from the Internet Broadband Router.
Using "Specify an IP Address"
•
If your PC is already configured, do NOT change the settings on the IP Address tab shown
in Figure 9 above.
Figure 8: Network Configuration
Figure 9: IP Address (Win 95)
PC Configuration
19
Advertisement
Table of Contents
