Table of Contents
Advertisement
Internet Sharing Gateway User Guide
3.
Select the network card for your LAN.
4.
Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify
an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the Internet
Broadband Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the Internet Broadband Router.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the
following changes.
1.
The Default Gateway must be set to the IP address of the Internet Broadband Router. To
set this:
•
Click the Advanced button on the screen above.
•
On the following screen, click the Add button in the Gateways panel, and enter the
Internet Broadband Router's IP address, as shown in Figure 14 below.
•
If necessary, use the Up button to make the Internet Broadband Router the first entry
in the Gateways list.
Figure 13: Windows NT4.0 - IP Address
22
Advertisement
Table of Contents
