Q-See QC40198 User Manual page 97

WEB OPERATION
Please refer to the following chart for detailed information.
Parameter
System
Time
Sync PC
Data
Format
Data
Separator
Time
Format
DST
Language
HDD Full
Pack
Duration
Device No
Video
Standard
Function
Here you can change system time. Please click Save button after
your completed changing
You can click this button to save your PC current time as the system
time
Here you can select data format from the dropdown list.
Please select separator such as – or /.
There are two options: 24-H and 12-H.
Here you can set daylight saving time, begin time and end time. See
Figure 7-24 and Figure 7-25.
You can select the language from the dropdown list. Device needs to
reboot to activate the change.
There are two options: stop recording or overwrite the previous files
when HDD is full.
When current working HDD is full, system stops recording.
When current working HDD is full, system starts to overwrite the
oldest files.
Here you can select file size. The value ranges from 1 to 120.Default
setup is 60 minutes.
When you are using one remote control to manage multiple devices,
you can give serial numbers to the devices.
Click the address button in the remote control and then input the
corresponding number to control the combo DVR.
There are two options: PAL/NTSC.
Please note, for the Web user, this information is for reference only.
You can not change.
88 | P a g e
QC40198 User Manual