Q-See QC40198 User Manual page 85

WEB OPERATION
QC40198 User Manual
Figure 7-5 Figure 7-6
If you get a error message that says the program cannot load because the publisher is unknown or the
program is unsigned, go to internet explorer→Tools→Internet Options (see Figure 7-4), then go to the
"Advanced" tab (RED box in Figure 7-7). This will open the window in Figure 7-8. Scroll down to "Security",
and select the options to "Allow software to run or install even if the signature is invalid", and "Allow Active
Content to Run Files on My Computer" (RED box in Figure 7-8).
Figure 7-7 Figure 7-8
Other plug-ins or anti-virus programs may be blocking ActiveX. Please uninstall or close them
NOTE: On many systems you many have another option. You can go into internet options in Internet Explorer, enter
the IP address you use to access the DVR as a trusted site, then go to the default level button and set move the bar
down to the low setting, click apply and ok. Do not select the option to enable protected mode or require server
verification. On Vista you may get an "unknown publisher or publisher can't be verified" error message. If you get
one of these messages you need to go to the advanced tab, down to the security settings, put checkmarks in the
options to allow active content to run on my computer, and allow software to run or install even if the signature is
invalid, and remove the check for the option to check for signatures on downloaded programs.
76 | P a g e