Q-See QC40198 User Manual page 112

WEB OPERATION
Parameter Function
Normal
out
Alarm
latch
Alarm
upload
Record
channel
Record
latch
Email
Tour
PTZ
Activation
Capture
Copy
Save
Refresh
There is 2-channel alarm output.

 Corresponding to motion detection alarm output port (multiple
choices)
Enable alarm activation function. You need to select alarm output port

so that system can activate corresponding alarm device when alarm
occurs.
System can delay the alarm output for specified time after alarm ends.
The value ranges from 10s to 300s.
System can upload the alarm signal to the centre (Including alarm
centre.
System auto activates motion detection channel (multiple choices) to
record once alarm occurs (working with motion detection function).
Please note current device shall be in alarm record period (Chapter
7.3.2.3 Schedule) and you have enabled the schedule record function
in chapter 7.3.3.3 Record.
System can delay the record for specified time after alarm ends. The
value ranges from 10s to 300s.
If you enabled this function, System can send out an email to alert you
when alarm occurs and ends.
 Display the selected video in local monitor window.
Tour interval and tour mode are set in combo DVR local menu

(chapter 5.3.9 Display )
Here you can set PTZ movement when alarm occurs. Such as go to

preset x when there is an alarm.
You need to input capture channel number so that system can backup
motion detection snapshot file.
This is a shortcut menu button. You can copy current channel setup to
one or more (all) channels.
You can click save button after you complete setup for one channel, or
you can complete the whole setup and then click save button.
Click this button to get device's latest configuration information.
103 | P a g e
QC40198 User Manual