NAVIGATION AND CONTROLS
4.5.3 Video Loss
As illustrated in Figure 4-25, select video loss from the Event Type list. This function informs you when video
loss has occurred. You can enable alarm output channel and then enable show message function.
Tips:
You can enable preset/tour/pattern activation operation when video loss occurs. Refer to chapter 4.5.2 motion
detection for detailed information.
4.5.4 Camera Masking
When someone viciously masks lens, the system can alert you to guarantee video continuity. Camera masking
interface is shown in Figure 4-26.
Note:
In Detect interface, copy/paste function is only valid for the same type, which means you cannot copy a channel
setup in video loss mode to camera masking mode.
Figure 4-25
35 |
P a g e
QC40198 User Manual